1951-1952 Dash Speaker Adapter for Dual 6.75" Speakers

Bring modern sound to your classic 1951-1952 Chevy Sedan!

This will allow you to install two 6.75" (and some 6.5" brands) speakers into the factory dash speaker location and will work with ash tray and non ash tray trim packages as well as clears the factory clock area.

Mounts to the 3 factory dash speaker grille studs, the top of the speaker adapter slots in under the top dash gill attachment tab, the bottom two studs are captured, 10-24 nyloc nuts included.  (see example picture of how frame attaches for reference)

(Fitment originally tested on a 1951 chevy dash)

This setup WILL NOT WORK if you are running a radio setup that uses the opening in the dash grill that originally displayed frequency.  Originally designed for Kicker 6.75" speakers, predrilled for the three most common 6.75" speaker mounting hole patterns, check your speaker before ordering. ( Holes are 7/16" deep and a diameter of 7/64" )

These parts are 3D printed out of ABS-GF filament and then annealed in a blast oven afterward for added strength and durability. 

Note 1: Due to the nature of 3D printing, there may be small imperfections in the print, but nothing that will affect part performance. 

Note 2: Be sure to check clearance before ordering, if you plan to run a speaker with a huge magnet / cage, may get a bit tight by the glovebox, see pictures.

Note 3:  This setup WILL NOT WORK if you are running a radio setup that uses the opening in the dash grill that originally displayed frequency, check for clearances before ordering.

Speakers not included.

All sales final as these are made to order.